Instructions
Materials
- 1 CD tower top
- 1 box of ear-tips
- 1 small egg-box
- 3 spice jars
- 1 large tupper (diameter aprox. 23cm)
- 1 board of (ply)wood (aprox. 34x39cm)
Tools
- tijeras / cutter / sierra
- taco de lija
- taladro
- tornillos de madera
- atornillador
- pegamento termofusible
Assambling
Cut spice jars leaving a height of approx. 4 cm. Make a round opening at the top of the box of CDs. In the tupper cut a slot about 10x2cm in the ceiling and rounded on one side.
Sand with sanding paper or sanding block all cuts to smooth the edges. Arrange the items on the board and perform drills on the board elements to screw them later on with wood screws ...
So you will see your board with the holes made.
But this is only an example and you can incorporate, with a little bit of imagination, many other elements ...
Paste CD box cover with hot melt glue on the tupperware to form a toy-feeder, so that food placed on the top floor will have to be moved through the slot Tin the tupper's ceiling and removed through the side opening. Screw all the elements on the board ... and voila! Fixing by screwing allows remove items to clean them, but you can also paste them to the board with (non-toxic) hot melt glue.
On our You Tube Channel you can see some videos of India and Miga using the funboard: Video 1 | Video 2 | Video 3
If DIY is not your thing, there's also a great variety of comercial funboards.
We show you some in Intelligence Toys for Cats.